Rear bumper cover Lada Vesta
search
  • Rear bumper cover Lada Vesta
  • Rear bumper cover Lada Vesta
  • Rear bumper cover Lada Vesta
  • Rear bumper cover Lada Vesta

Cover in the rear window (Jabo) (ABS) LADA Vesta Sedan

$36.00

Material: ABS plastic
Dimensions: 1200х130х40 mm.
Functional: Protection against debris, leaves, snow and ice.
Production: Russia / Togliatti
Fits the Lada Vesta sedan from 2015 to the present.

Cover in the rear window LADA Vesta is designed to prevent the accumulation of snow, leaves and dirt in the boot lid area.
The company "PT Group" has developed its own version of the jabot, which differs favorably from its competitors in some nuances:
1. Along the edges of the lining there are chutes for draining water from under the frill.
2. The ends of the toad are slightly bent so that the dust and fine debris are not hammered under the cover
3. Due to the change in the shape of the edge adjacent to the seal, the lining falls on the glass without tension, which improves the quality of the fit to the glass.

Installation:


Jabo on Lada Vesta is installed in the rear window and trunk opening and fixed with the help of 3M scotch across the entire width of the glass and in the drainage gutter area. Installation of the product does not require drilling additional holes in the body of the car. The installation requires compliance with all the items of the attached installation instructions.


Material:


The cover in the rear window (jabot) opening LADA Vesta is made of ABS plastic (impact-resistant thermoplastic resin). The material is resistant to most types of chemical reagents: acids, alkalis and fats. An important factor in daily operation is the increased rigidity of the structure and the resistance of the surface to scratches.


Exploitation:


As practice shows, during the day-to-day operation, LADA Vesta accumulates snow, foliage and dirt in the rear window. It takes a lot of time and effort to clean this hard-to-reach place. After installing the frill, cleaning in the rear window opening is much simpler. The ABS plastic cover closes this cavity and even a large layer of snow is cleaned after a few strokes of the car brush.


Advantage:


After installing the cover in the rear window LADA Vesta car is not removed from the factory warranty. The jabo is made from a similar factory plastic and after installation it does not stand out from the general style of the car. By the ratio of price and quality, the overlay in the rear window opening is one of the best offers on the market of additional accessories.

chat Comments (0)